|
Post by Zorch on Mar 23, 2017 13:47:38 GMT
I havent got a sprocket wrench and need some advice on getting the front and rear sprockets off when the time comes. Pobably use a breaker bar.
Sinnis apache 125 Ffront sprocket: What direction to take it off, clockwise or counter clockwise? What size socket for the nut?
Back sprocket, anyone had broken studs when doing this removal?
Thanks
Zorch
|
|
|
Post by Alan on Mar 23, 2017 15:49:00 GMT
looking at the bike from the left hand side , you need to unscrew in a ANTI clockwise direction , bend lock tab back first , yes you will need a breaker bar , and sit on the bike (chain on) in gear with foot on brake , even running the front wheel upto a wall etc cant remember the size as I used an obscure imperial socket I had lying around , removing the side cover and measuring across the flats will give you a size you need to beg / borrow/steal , regarding the rear sprocket , is there not a big circlip to come off first?
|
|
|
Post by nutznbolts on Apr 5, 2017 13:47:46 GMT
27mm Socket. Can get from Half***s or just ebay it for better quality and cheaper price (around £6-£8 mark).
|
|